Hilti ACSR NCT 45-A Mode D'emploi Original page 20

Status
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED flashes, the power tool is ready for use.
Battery charge status cannot be displayed while the control switch is pressed.
3.5 Items supplied
Cutting tool, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
Rated voltage
Weight in accordance with EPTA Procedure 01
Max. cable diameter
max. cutting capacity for steel-reinforced aluminum cable (ACSR):
1590 MCM (Falcon)
max. cutting capacity for steel rope (standard) / guy wire (standard)
max. cutting capacity for steel rope (EHS) / guy wire (EHS)
max. cutting capacity for reinforcing bar
Storage temperature
Ambient temperature for operation
4.1 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise values
Sound power level (L
WA
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration values
Total vibration (during operation) (a)
Uncertainty (K)
16 English
)
)
WA
)
pA
)
pA
Meaning
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
2260836
*2260836*
21.6 V
4.0 kg
45 mm
44.4 mm
(1 3/4 in)
15.9 mm
(5/8 in)
13 mm
(1/2 in)
13 mm
(1/2 in)
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
80 dB(A)
2.5 dB(A)
70 dB(A)
2.5 dB(A)
2.5 m/s²
1.5 m/s²