7.2 STOW THE MACHINE
• Remove the battery pack before you store the charger or disconnect the
charger.
8. TROUBLESHOOTING
PROBLEM
Charger doesn't
work. Charger shows
defective mode. (LED
flashes Red)
Charger doesn't
work. Charger shows
evaluation mode (LED
indicates Red solid
ON).
9. TECHNICAL DATA (BATTERY CHARGER)
2900802
Model
Voltage 40 V
120V AC 50/60Hz, 0.6A
Input
Max
40V DC 0.5A
Output
29482/CAF806
Model
Voltage 40 V
120V AC 50/60Hz, 2.5A
Input
Max
40V DC 2A
Output
CAF814
Model
Voltage 40 V
POSSIBLE CAUSE
Battery pack or
charger is defective
or there is a bad
connection between
the battery pack and
charger.
Battery pack is either
too hot, or too cold.
9
SOLUTION
Try to remove and reinsert the
battery pack in the charger.
Try charging a different battery
pack.
Unplug the charger and wait
until the red LED goes out,
then reconnect the plug to the
power supply.
Allow the battery pack to reach
normal temperature. Charging
will begin when the battery
pack returns to 3°C-47°C
(37°F-117°F).
120V AC 50/60Hz, 2.5A
Input
Max
40V DC 2A
Output
29492
Model
Voltage 40 V
100-120V AC 50/60Hz,
Input
2.6A Max
40V DC 4A
Output
CAF826
Model
Voltage 40 V
120V AC 50/60Hz, 3A Max
Input
40V DC 4A
Output
EN