Publicité
Les langues disponibles
Les langues disponibles
opening. Ensure that the oven is level and correctly positioned before continuing with the
installation process.
2. Once the oven is in its proper position, proceed to securely fasten it in the cabinet. Open the
oven door and use the screws provided to secure it in place.
Important
It is essential that you do not twist the connection cable during installation of the built-in oven.
Clean the inside of the microwave oven and put the turntable back in place. If you are installing
for the first time, be sure to remove all packaging and shipping tape from the turntable shaft.
Also clean the accessories.
Installing the turntable. Fig. 5
1.
Turn the turntable ring assembly in the corresponding hole.
2. Place the turntable on top of the ring. Fit the lower grooves in the centre of the turntable
between the three shaft rollers.
3. Make sure that the turntable fits on the shaft and that it is correctly positioned in the inner
hole of the appliance. The shaft rollers must fit into the holes integrated at the bottom of
the turntable.
Note:
-
Never use the appliance without the turntable. Make sure it is properly placed. The
turntable can rotate either clockwise or counterclockwise.
-
Never place the turntable upside down. The rotary motion of the turntable must never be
blocked.
The glass turntable, shaft assembly and turntable must always be installed prior to
-
operation.
-
Food and containers must always be placed on the glass turntable.
If the glass turntable or the turntable ring assembly cracks or breaks, please contact the
-
official Cecotec Technical Support Service.
Microwave-safe materials
Utensils
Browning dish
Dinnerware
Notes
Follow the manufacturer's instructions. The bottom of the browning
dish must be at least 5 mm above the turntable. Incorrect use can
cause the turntable to break.
Microwave-safe only. Follow the manufacturer's instructions. Do not
use broken or chopped dishes.
ENGLISH
BOLERO HEXA MWO703800 LINE
57
Publicité
