Publicité
Les langues disponibles
Les langues disponibles
GLOSSARY
ACTIVATE (OPERATING CONTROLS)
To move an operating control so that it is in a position that
allows the tool to be actuated or that satisifes one require-
ment for the tool to be actuated.
Actuate (tool)
To cause movement of the tool component(s) intended to
drive a fastener.
Fastener
A staple, pin, brad, nail, or other fastening device which is
designed and manufactured for use in the tools within the
scope of this standard.
Jam
An obstruction in the feed or drive areas of the tool.
FEATURES
PRODUCT SPECIFICATIONS
Magazine Capacity ............................................... 105 Nails
Nailer Speed ......................................... up to 60 shots/min.
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
Operating control
A control that separately, or as part of an actuation system,
can cause the actuation of a tool.
Trigger
A tool operating control activated by a tool operator's fingers.
Workpiece
The intended object into which a fastener is to be driven
by a tool.
Workpiece contact
An operating control element or assembly on the tool
intended to be activated by the material to be fastened.
Nail Type ............................................................... 18 gauge
Brad Nail Length ................................................... 5/8 - 2 in.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with
this product. Any such alteration or modification is mis-
use and could result in a hazardous condition leading
to possible serious personal injury.
7 – English
Publicité
