Sefa CLAM SPORT V3 Manuel Utilisateur page 9

c� Installing and using the accessories
To change the upper platen, unplug the machine from the power source, wait until the
platen is cold and unplug the quick-release plug connecting it to the machine. Undo
the two black thumbwheels and change the platen. Reconnect the quick-release plug.
To change the lower platen, undo the two thumbwheels on each side of the accessory
and change the accessory. Note: the ball accessory can be fitted in two ways.
Thumbwheels
d� Setting the height of the accessory
-
-
-
-
Adjustment
wheel
Locknut
Ball lower plate
e� Setup options
www.sefa.fr
High position for
small balls
Undo both thumbscrews
Undo the locknut
Turn the lower platen or adjustment wheel clockwise or anti-clockwise
to adjust the height
Tighten the locknut / thumbscrews
Locknut
Logo / shoe lower plate
Ball
User guide - SEFA CLAM SPORT V3
Thumbwheels
Low position for
180° rotation
large balls
Adjustment
wheel
Cap
thumbscrews
Adjustment
Cap lower plate
Shoe / Logo
Knurled
wheel
9