Smart Touch ® Control Screen - Sefa CLAM SPORT V3 Manuel Utilisateur

SMART TOUCH ® CONTROL SCREEN
a� Pressing time
Press here to set the machine's pressing time.
Use the left and right arrow keys to increase and decrease the
setting.
You can also have 4 consecutive pressing times (cf. "settings
(e)") on single-platen presses and up to 4 times for dual-
platen presses.
You can also change this setting by pressing the time display
and entering the required time from the touch pad (4 cha-
racters must be entered).
Once you have entered the required time, press the "confirm"
key in the bottom right corner of the screen.
b� Temperature settings
Press the temperature menu. You can select the temperature
you require in the same way as for the pressing time, using
the arrow keys on the left and right of the temperature dis-
play. You can also click on the reading and manually select
a temperature. When entering a temperature below 100°C,
place a 0 before the desired value (e.g. 090° C).
Select the material profile you wish to press from the 3 op-
tions provided (TEXTILE, RIGID and DTG) and press the
confirm icon.
www.sefa.fr
190°C
25°C
RIGID
1:00
0:30
001502
User guide - SEFA CLAM SPORT V3
Recipes (d)
Temperature - current & setpoint (b)
Pressing time (a)
Settings (e)
Counter (c)
Stop cycle
25°C
1:00
001502
25°C
1:00
001502
TEXTILE RIGID
190°C
RIGID
0:30
190°C
RIGID
0:30
DTG
11