SilverCrest SWH 65 A1 Instructions De Montage Et Consignes De Sécurité page 12

Never exceed the product's maximum load
capacity of 35 kg (77 lbs) or else it may result
in product failure or personal injury.
This product is intended for indoor use only.
Use of this product outdoors could lead to
product failure or personal injury.
Installation
Safety gear and proper tools must be used.
A minimum of 2 people are required for this
installation.
Never use violence or excessive force for
assembly. This could damage your TV set or
the product.
After mounting the product, check its stability
and operational reliability as well as that of the
mounted load.
Use
Maintain a safe distance of at least 73 cm
around the mounted load.
In the case of damage, remove the mounted
load and stop using the product.
Maintenance
Check joint parts every 2 months to ensure that
no screws have loosened.
Check the product's stability and operational
reliability as well as that of the mounted load
at regular intervals (at least every 3 months).
NOTES:
Bearing in mind the wide variety of TV sets
and wall mountings available on the market,
the supplied mounting kit may not cover all the
possibilities.
In rare cases, it is possible that the screws for
attaching the TV set may be too long. If this is
the case, use the supplied extension washers.
If the mounting material necessary for your TV
set is not provided in the supplied mounting kit,
please purchase the items you require from a
specialist shop.
If your wall is made of different types of
materials and construction than that intended
for the installation, purchase suitable materials
from a specialist shop.
12 GB/IE
˜ Description of parts
1
4
Mounting rails
1
Wall bracket
2
Safety screw
3
Magnetic removable spirit level
4
TV attachment screw set
Screw
5
Screw
6
Screw
7
Screw
8
Extension washer
9
Square washer
10
Wall mounting screw set
Screw
11
Wall plug
12
Washer
13
2
3
(2x)
M5 x 35 mm (2x)
M4 x 25 mm (4x)
M5 x 25 mm (4x)
M6 x 25 mm (4x)
M8 x 25 mm (4x)
(4x)
(4x)
(4x)
(4x)
(4x)