PLAYTIVE NK-8324 Notice D'utilisation page 4

• Do not jump off the swing while it is swinging.
Only get off the swing when it has come to a
stop.
• Make sure there is enough room between the
swing and other people and objects so that
no one can be injured.
• The product should be a suitable safe
distance of at least 2m from buildings, stairs,
fences, walls, water, overhanging branches,
c lotheslines, electrical lines, and other obstac-
les.
• Note that the swing can become hot in strong
sunlight.
• No technical alterations may be made to the
product.
Swing assembly
Use commercially available waterproof
machine grease to lubricate the metal
suspension rings of the nest swing as
well as any suspension hooks that you
yourself provide that are exposed to
constant friction.
1. Select a level and clean surface with enough
room to assemble the swing.
2. Lay the nest swing (1) out on the floor.
3. Guide the four side reinforcements (2) through
the straps on the edge of the nest swing.
When inserting the side reinforcements, make
sure one thin end points to one thick end.
4. Push the four side reinforcements together. The
drill holes of each pair of side reinforcements
must overlap precisely (figure B).
5. Loosen the pre-assembled nuts on the moun-
ting brackets (3) and remove them as well as
one washer.
6. Put a hook with the remaining washer through
a drill hole from above.
7. Put the second washer on from underneath.
8. Secure the hook with a nut (figure C).
Attach the swing only to fittings that you can
guarantee with absolute certainty to be of suffi-
cient strength. For assembly use standard com-
mercial swing hooks with a minimum thickness of
10 mm and with a safety feature to prevent them
from inadvertently coming loose. With wooden
beams the attachment must go right through
the wood and be locked from above to ensure
sufficiently secure connection.
6 GB/IE/NI
Different attachment hooks
Only mount the swing on suitable mounts.
These are:
No. 1: closed mounting hooks that are fastened
to the swing elements with a carabiner hook
(figure D).
No. 2: standard commercial swing hooks with a
safety feature to prevent them from inadvertently
coming loose (figure E).
Note! The eye on the mounting eye
(1) must be attached transverse to the
swing direction so that the attachment
element of the swing is not damaged
too badly during use.
Setting the height of the
swing element
The height of the seat can be set using the ring
on the upper end of the swing. Once you have
set the length of the rope it will tighten itself
when load is placed on the swing (figure F). Set
the length on both sides in such a way that the
swing is absolutely horizontal.
Maintenance (fig. G)
Check the product's rings, hooks and eye bolts
regularly to ensure their good order and condi-
tion and use commercially available waterproof
machine grease to periodically lubricate the
suspension rings that come with the product as
well as any suspension hooks that you yourself
provide. An alternative is to use an adhesive
chain grease.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature.
Clean only with water and wipe dry afterwards
with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.