Publicité
Les langues disponibles
Les langues disponibles
PACKING LIST
OPERATING INSTRUCTIONS
1.Normal working
① Time function
Short press:
Cyclic mode of fog off open -off, indicator light shows white when you
open the function, shows blue when you close the function.
Long press:
Clock function setting.
② Light function
Short press:
Cyclic mode for "cold white-warm white-natural white", white indicator
light for open, blue indicator light when close it.
Long press:
Light dimmable between 10% to 100%, the minimum is 10%, long
press again, the light maximum is 100%.
2.Non-working
① Time function
Short press:
Open the display.
② Light function
Short press:
turn on the light.
3.Clock function
Time function
①
Long press: When connecting to power, long press
long press again to move to the next digit setting. The digits will flash when ready to be set.
Short press
to add 1. After finishing the setup, long press to save the previous settings
and exit the setup mode. If not long pressed, the settings will not be saved, and the setup
mode will automatically exit after 10 seconds.
Light function
②
Short press: After connecting to power, short press
again to switch the light color.
Long press: When the lights are on, long press
30cm
INSTALLATION METHOD
① Prepare tape measure,electric drill,hammer,screwdriver,pliers.
② Determine the appropriate height on a solid wall and draw
two punctuations with a horizontal distance of 30 cm .
③ Drill holes in the punctuation, the depth of the hole is 3cm,
knock the rubber plug into the hole, and then screw the
screw, the screw is 2cm above the wall.
④ Pick up the product with both hands and hang it with the
hook on the back of the product.
3
to enter clock setting mode. Then,
to turn on the light. Short press
to adjust the brightness.
Publicité
