Maintenance - Haussmann PT100116 Guide De L'utilisateur

OPERATION
Protection Against Deep Discharging
The Li-ion battery is protected against deep discharging by the "Electronic Cell
Protection (ECP)". When the battery is empty, the machine is switched off by
means of a protective circuit: The inserted bit no longer rotates.
Operating Instructions
Apply the power tool to the screw only when it is switched off. Rotating tool
inserts can slip off.
Soft Grip
The gripping surface (soft grip) reduces the danger of slipping and thereby
improves the grip on the machine and its handling.
At the same time, the rubber coating achieves a vibration-reducing effect.
Tips
After longer periods of working at low speed, allow the machine to cool down by
running it for approx. 3 minutes at maximum speed with no load.
For drilling in metal, use only perfectly sharpened HSS drill bits (HSS=high-speed
steel). The appropriate quality is guaranteed by our accessories program.
Before screwing larger, longer screws into hard materials, it is advisable to predrill
a pilot hole with the core diameter of the thread to approx. 2/3 of the screw length.

MAINTENANCE

CAUTION! Place the direction of rotation direction switch into the middle
position before carrying out any tasks on the device, e.g. changing tools or
!
maintenance, or before transporting or storing the device. Inadvertent operation
of the On/Off switch may result in injury.
Always pull the battery charger out of the mains socket and remove the battery
pack before you clean or maintain the device.
The cordless Drill/Driver is maintenance-free.
1) Always keep the device clean, dry and free of oil or grease.
2) Clean the device immediately after you have finished using it
3) Do not allow any liquids to enter the device. Use a cloth to clean the
4) Never use petrol, solvents or cleaning agents that might attack plastic.
Do not dispose of electrical appliances with your domestic waste!
The packaging is made from environmentally- friendly material. Dispose of it in
your local recycling containers.
Service
Have your tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the tool is maintained.
housing.
21