Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Thank you for choosing this product from JessEm Tool Company. We appreciate your
support and hope that our product serves you well. This product is designed to provide
many years of reliable service provided it is used as intended and taken care of.
This user manual will assist you in assembly and general operation of this product. It is
not our intent to teach you about woodworking. It is assumed that you are an
experienced woodworker with the basic skills and experience necessary to use this
product safely. If after reading the following instructions you are unsure or
uncomfortable about safely using this product, we urge you to seek additional
information through widely available woodworking books or classes.
As part of our Continuous Product Improvement Policy, JessEm products are always
advancing in design and function. Therefore, there may be differences between what is
shown in our catalogs, website or at retail display and what is sold at time of purchase.
We reserve the right to make positive changes to our products at our discretion.
Find us on social media
us toll free at
If you have any questions about our products or service, please call
1-800-436-6799
c
x
n
x
or email us at
customerservice@jessem.com
CLEAR-CUT FLEX
STOCK GUIDES
MODEL # 04250
Local Phone: 705-726-8233
Fax: 705-327-0295
Website: www. JessEm.com
x
324 Desbrisay Avenue
Moncton, New Brunswick,
E1E 0G8, Canada
Publicité
Manuels Connexes pour JessEm 04250
Sommaire des Matières pour JessEm 04250
- Page 1 STOCK GUIDES MODEL # 04250 Thank you for choosing this product from JessEm Tool Company. We appreciate your support and hope that our product serves you well. This product is designed to provide many years of reliable service provided it is used as intended and taken care of.
- Page 2 WHATS IN THE BOX Part Description 04250-R 04250-L F0525 1/4"-20 x 7/8” Low Head Cap Screw S0061-25 Custom Stainless-Steel Washer S0054-9 Washer Insert M0296 1/2" ID x 3/4" OD One Way Roller Bearing M0301-1 Roller M0392 #319 Polyurethane O-Ring S0047-7 Roller Axle –...
- Page 3 ASSEMBLY To assemble the stock guides, start by using (1) of the T-Bolts included and slide it through the backside of the acetal washer and attach (1) 1/4" stainless washer and (1) pivot knob to the T-Bolt. (As seen in image below). Using another T-Bolt, slide it through the larger opening and then add (1) 1/4"...
- Page 4 Installation To install Clear-Cut Flex Stock Guides on your fence, loosen both the lock knob and the pivot knob to allow the ¼”-20 T-bolts on each guide to slide into the T-slot on your fence. Each guide is labeled for either the infeed side or outfeed. Slide them toward your fence guard, ensuring they can pivot up and down without hitting it.
- Page 5 To use Clear-Cut Flex stock guides on a jobsite table saw, create a mounting bracket as shown in the image below.
- Page 6 BOIS SPÉCIAUX MODÈLE No.04250 Merci d'avoir ce produit de la Société JessEm Tool. Nous apprécions votre soutien et espérons que notre produit vous sera utile. Ce produit est conçu pour fournir plusieurs années de service fiable sous réserve qu'il est utilisé comme prévu et bien entretenu.
- Page 7 Ce qu’il y a Dans la Boîte Part Description 04250-R 04250-L F0525 Vis d'assemblage à tête basse 1/4-20 x 7/8" S0061-25 rondelle inox sur mesure S0054-9 Insert de rondelle M0296 Roulement à rouleaux à sens unique 1/2" I.D x 3/4" O.D...
- Page 8 ASSEMBLY Pour assembler les guides de stock, commencez par utiliser (1) des boulons en T inclus et faites-le glisser à travers l'arrière de la rondelle en acétal et fixez (1) bouton de pivot au boulon en T. (Comme on le voit sur l'image ci-dessous). À l'aide d'un autre boulon en T, faites-le glisser à...
- Page 9 Installation Pour les installer sur votre clôture, desserrez à la fois le bouton de verrouillage et le bouton de pivotement pour permettre au boulon en T 1/4-20, sur chaque guide, de glisser dans la fente en T de votre clôture. Chaque guide est étiqueté pour le côté...
- Page 10 Pour utiliser les guides de stock Clear-Cut Flex sur une scie à table de chantier, créez un support de montage comme indiqué dans l'image ci-dessous.