Goldstar R1203H Manuel D'utilisation page 12

10.Slidethe unitintothe cabinet.(See Fig.7)
CAUTION: F orsecuritypurpose,reinstall
screws(Type A ) at cabinet'ssides.
11,Cutthe foamostnp ® to the properlength
andinsertbetweenthe upperwindowsash
andthe lowerwindowsash.
(SeeFig.8)
12. Attachthe windowlockingbracket@witha
typeC screw.(SeeFig.9)
Screw(Type A}
z
Screw(Type A)
.......Power cord
Fig. 7
Foam-S_rip
Fig. 8
locking bracket@
Fig, 9
13. Attach the front grille to the cabinet by insert-
ing the tabs on the grille into the tabs on the
front of the cabinet. Push the grille in until it
snaps into pLace.(See Fig. 10)
14. Lift the inlet grille and secure it with a type A
screw through the front griHe.(See Fig. 11 )
..............
Fig, i0
Fig. 11
Fig. 12
_12o