Publicité
Les langues disponibles
Les langues disponibles
Internal temperature of the hob is too high,
E5
switch the hob off by pressing
heaters cool down.
Communication error between the touch
E6
control and heater. Call an authorised service
Coil temperature sensor is disabled. Call an
E7
authorized service agent.
Cooler temperature sensor is disabled. Call
E8
an authorized service agent.
Large Coil Saturation Error. Switch the hob
off by pressing on/off button, switch the hob
EA
on by pressing on/off button and continue to
use. If the same error is displayed again, call
an authorised service agent.
Supply Voltage Error.Switch the hob off by
pressing on/off button, switch the hob on by
EC
pressing on/off button and continue to use.
If the same error is displayed again, call an
authorised service agent.
Microprocessor alert. After this warning,
cut off energy from the product and then
C1-C8
re-energize the product. If the same error is
displayed again, call an authorised service
5. CLEANING AND
MAINTENANCE
5.1 CleaninG
WARNING: Switch off the appliance
and allow it to cool before cleaning is
to be carried out.
General Instructions
•
Check whether the cleaning materials
are appropriate and recommended by
the manufacturer before use on your
appliance.
•
Use cream cleaners or liquid cleaners
which do not contain particles. Do
not use caustic (corrosive) creams,
abrasive cleaning powders, rough wire
wool or hard tools as they may damage
the cooker surfaces.
Do not use cleaners that contain
particles, as they may scratch the
glass, enamelled and/or painted parts
of your appliance.
•
Should any liquids overflow, clean them
immediately to avoid parts becoming
damaged.
Do not use steam cleaners for
cleaning any part of the appliance.
and let the
agent.
agent.
EN - 18
Cleaning the Ceramic Glass
Ceramic glass can hold heavy utensils but
may be broken if it is hit with a sharp object.
WARNING : Ceramic Cooktops - if the
surface is cracked, to avoid the
possibility of an electric shock, switch
off the appliance and call for service.
•
Use a cream or liquid cleaner to clean
the vitroceramic glass. Then, rinse and
dry them thoroughly with a dry cloth.
Do not use cleaning materials meant
for steel as they may damage the
glass.
•
If substances with a low melting point
are used in the cookware's base or
coatings, they can damage the glass-
ceramic cooktop.If plastic, tin foil, sugar
or sugary foods have fallen on the hot
glass-ceramic cooktop, please scrape
it off the hot surface as quickly and as
safely as possible. If these substances
melt, they can damage the glass-
ceramic cooktop. When you cook very
sugary items like jam, apply a layer of a
suitable protective agent beforehand if it
is possible.
•
Dust on the surface must be cleaned
with a wet cloth.
•
Any changes in colour to the ceramic
glass will not affect the structure or
durability of the ceramic and is not due
to a change in the material.
Colour changes to the ceramic glass may
be for a number of reasons:
1. Spilt food has not been cleaned off the
surface.
2. Using incorrect dishes on the hob will
erode the surface.
3. Using the wrong cleaning materials.
Cleaning the Stainless Steel Parts (if
available)
•
Clean the stainless steel parts of your
appliance on a regular basis.
•
Wipe the stainless steel parts with a soft
cloth soaked in only water. Then, dry
them thoroughly with a dry cloth.
Do not clean the stainless steel parts
while they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt,
water, lemon or tomato juice on the
stainless steel for a long time.
Publicité
