Publicité
Les langues disponibles
Les langues disponibles
The image above shows the front right
heater display indicating the boiling
function.
Frying Function
This function will fry oil at around 160°C.
To activate this function, press the heater
selection button three times. When the
frying function has been activated, the
corresponding display will show 'F'. The
hob will beep when the oil is ready for
frying.
In the above image, the front right heater
display is indicating the frying function.
Keep-Warm Function
This function allows the temperature of
food to be kept at around 50°C. To activate
the keep-warm function, press the heater
selection button four times. When the
keep-warm function has been activated, the
corresponding display will show 'u'.
The image above shows the front right
heater display indicating the keep-warm
function.
Chocolate-Melting Function
This function melts chocolate or similar
foods at around 40°C. To activate the
chocolate-melting function, press the
heater selection button five times. When
the chocolate-melting function has been
activated, the corresponding display will
show 'c'.
The above image shows the front right
heater display indicating the chocolate-
melting function.
Performance and time may vary
according to the quantity of food in the
pan and the quality of the pan. 1.5
litres of water or 0.5 litres of oil gives the
best cooking performance with these
functions.
If there is an error, an error code will be shown on the
Ampere limit feature must be selected at the
moment the product is energized. Otherwise
E0 error is seen. At the same time, this
feature should be selected on the display
E0
and mainboard. If there is an error in the
software of any card, the product will show
an error. The customer cannot interfere
in this error. Authorized service should be
Cooling Fan is disabled. Call an authorised
E1
This error is seen when the heater gets too
hot. In case of this error, the heater must be
E2
cooled. It should be operated after cooling,
Supply voltage is other than the rated values.
Switch the hob off by pressing
"H" disappears for all zones, switch the hob
E3
on by pressing
the same error is displayed again, call an
Supply frequency is different from the rated
values. Switch the hob off by pressing
zones, switch the hob on by pressing
and continue to use. If the same error is
E4
displayed again, switch the plug for the
appliance off and on. Switch the hob on by
pressing
error is displayed again, call an authorised
EN - 17
Error Codes
heater displays.
called.
service agent.
again.
and continue to use. If
authorised service agent.
, wait until "H" disappears from all
and continue to use. If the same
service agent.
,wait until
Publicité
