Ryobi OP40BP Manuel D'utilisation page 12

OPERATING A 40V TOOL
See Figure 12.
WARNING:
Always operate your tool in compliance with the
manufacturer's instructions.
 Install one or more battery packs into the backpack, and
close the battery cover.
 Connect the battery box to the adjustable harness.
WARNING:
To avoid serious personal injury, always remove the
battery packs from the product when cleaning or
performing any maintenance.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
WARNING:
Never use water or any liquids to clean or rinse off
your product and do not expose the product to rain or
wet conditions. Store indoors in a dry area. Corrosive
liquids, water, and chemicals can enter the product's
electronic components and/or battery compartment and
damage electronic components and/or the battery pack,
which can result in a short circuit, increased risk of fire,
and serious personal injury. Remove any buildup of dirt
and debris by wiping the product clean with a dry cloth
occasionally.
This product has a Five-year Limited Warranty for personal, family, or
household use (90 days for business or commercial use). For warranty
details, visit www.ryobitools.com or call (toll free) 1-800-860-4050.
OPERATION
 Slip an arm through each of the shoulder straps and place
the backpack on your shoulders. Adjust the harness to a
comfortable position. Refer to Adjusting Harness Straps
earlier in this manual.
 Install the adaptor into your tool.
 Hold the tool in the proper operating position and begin
operation. Refer to the tool's operator's manual for
instructions on starting and using the tool.
 When finished, stop the tool and disconnect the adaptor.
MAINTENANCE
NOTICE:
Periodically inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts,
caps, etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or damaged
parts are replaced. Please contact customer service or
a qualified service center for assistance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which can result in serious personal injury.
STORAGE
 If installed, remove battery packs and integrated charger.
 Clean all foreign material from the backpack.
 Store indoors in a secure place that is inaccessible to
children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
8 — English