planeo 219A Manuel De L'utilisateur page 5

Gateway
User manual
Thank you for purchasing the planeo Gateway.
This document contains the required information for
correct, efficient and safe use of the product.
Read the information in this manual carefully before
using the product. Keep this manual near the product for
consultation in the future.
PRODUCT DESCRIPTION
The Zigbee-based Gateway provides a stable and fast
network. The Gateway allows you to connect to the
smart lights Oberon and / or Castor and to the Motion
Sensor Smart (the Gateway must be added first before
the products can be added). Each smart light amplifies
the signal so you have coverage throughout your garden!
The advantage of Zigbee is that the products
communicate with each other, giving you an endless
range. You can maintain a maximum distance of 20
metres between two different products.
This product may only be used in combination with the
12-Volt system. Any modification may have an impact
on the safety, warranty, and correct operation of the
product and/or other parts of the system.
SPECIFICATIONS GATEWAY
Product
Article number
Dimensions (H x L x W)
Protection class
CONTENT OF THE PACKAGING
1. Gateway
2. USB Cable
3. USB Charger
4. Reset tool
Verify whether all parts are included in the packaging. For
questions about parts, service, complaints, or other
things, you can always contact us.
Email: info@planeo.de.
planeo Gateway
219A
64 x 64 x 15 mm
IP20
ZIGBEE
The products can communicate with each other via
Zigbee, giving you an endless range. The maximum
distance between two products is 20 meters.
For the SMART system to work properly, the transformer
must be on continuously (do not use a light sensor or
other accessories).
PAIRING GATEWAY
1. Click '+' at the top right of the app.
2. Click 'Add device'.
3. Choose 'Multi-function Gateway (Zigbee)' Make sure
you are connected to a 2,4 GHz Wi-Fi network.
4. Confirm whether the device is flashing:.
When the blue LED is on continuously and the red
LED is flashing, the Gateway is installed. If not, reset the
Gateway with the metal pin provided.
5. Indicate whether the Gateway is flashing fast or slow.
6. The app will now connect to the Gateway. This can take
up to 2 minutes.
7. A message appears once the Gateway is connected.
HOW TO RESET THE GATEWAY
Press and hold the reset button for 10 seconds using
the pin provided. Then wait until the red light starts
flashing rapidly (after about 30 seconds).