Outsunny 845-340 Mode D'emploi page 3

CONSTRUCTION OF THE WAGON:
1. Open the strap that holds the wagon together (on the side of the wagon). Then
pull the front and rear of the frame apart to unfold / build the wagon.
NOTICE: When assembling, make sure you do not pinch your fingers.
2. Adjust the handle. Please note, the handle has a safety lock.
Adjusting the handle height:
Open the locking lever on the handle, then pull out the handle to the required
height. Close the locking lever to fix the handle at the desired height. The handle
sits in a plastic clamp, just pull out the handle to use it, as shown in the picture.
3