DELTA DORE Tywatt 5600 Mode D'emploi page 18

Customer Information System connection.
- Connect the Customer Information System (CIS) of the
electronic meter to terminals 4 and 5 of the Tywatt.
Switch the system on again.
Remember to specify the type of substation measu-
red on the plate of the electrical cabinet.
3 - Association
3.1 Linking with the Tydom app
From the Tydom application, select:
Settings > My home > My devices > Add a device >
Consumption > Tywatt 5600 > then follow the
on-screen instructions.
After pairing, select the Tywatt to configure the
substation measured by the TI (heating, hot water,
outlets, cooling).
18