Publicité
Les langues disponibles
Les langues disponibles
Handlebars
Bolt
Minimum
insertion mark
Handle
Fixing screw
3. Install seat
Insert the seat tube into the middle tube and adjust the seat height
according to the kid's height, but do not exceed the minimum
insertion amount of the safety line. Lock the quick release code to
ensure that the saddle does not move as shown in figure 3
Seat tube
Safety line
Figure 3
08
Bolt
Handlebars
Minimum
insertion mark
Bolt
Minimum
insertion mark
Quick release clamp
Middle tube
4. Check the screws
After the assembly is complete, check all screws to ensure that
they are locked within normal limits.
(Front and rear wheel nut locking torque:
180-250Kgf.cm/18-25N.m) as shown in figure 4
Figure 4
5. Maintenance instructions
1. Clean the product with a soft cloth and a small amount of water
and cleaning solution;
2. Do not store the product in a place with high temperature, sun
exposure or excessive dust, and keep the body dry;
3. If you have technical problems or are unsure about the safety of
the vehicle, please consult qualified technician
4. Children are not allowed to use this product without being taken
care of.
09
Publicité
