Notes:
The remote control shall be applied in effective reception
scope of the television. Make the remote control point
towards the infrared receiver of the television and ensure
that there are no obstacles. Its normal operation distance
will be shortened in direct sunlight or lamplight.
Be careful to use the remote control. avoid falling
off or being trampled or splashed with liquids.
Battery replacement
1
Open the
battery cover
on the remote
control.
WARNING: danger of explosion if the batteries are inserted incorrectly or if they are
replaced by a different or incompatible model.
- Replace the batteries only with batteries of the same or equivalent type.
- Batteries should not be exposed to excessive heat such as sunshine, fire, or the like.
- Never throw the batteries into a fire and never expose them to heat sources.
- Do not mix different types of batteries, or new and used batteries.
- The batteries must be inserted respecting the polarities indicated on the battery and in
the battery box of the remote control.
- Old batteries must be removed from the remote control.
- Batteries must be disposed of in a safe manner, at specific collection points assigned to
protect the environment. Follow the disposal instructions on the batteries and at the
collection points.
- Keep batteries out of the reach of children and pets. Only adults are able to handle
batteries.
Automatic standby
The power consumption of this unit during operation and standby mode has been
reduced. Therefore, if no action is recorded after four hours, the unit will automatically go
into sleep mode. To cancel the sleep timer, simply press a key.
2
Insert two AAA size
batteries making sure to
match the positive and
negative icons of battery
and battery compartment.
EN-18
3
Then close
the battery
cover.