Télécharger Imprimer la page

WISBERG WBVR186NFE Notice D'utilisation page 43

Publicité

Les langues disponibles

Les langues disponibles

PROBLEM
POSSIBLE CAUSE
The com-
- Too many products are stored at the
pressor
same time.
works con-
- The room temperature is too high.
tinuously.
- The food placed in the appliance
was too hot.
- The door is not closed properly.
The alarm
- The door is open.
goes off.
- The temperature in the appliance
is too high. The display shows the
message 'HT'
The side
- This is normal. The heat exchanger components are on the side of the appliance.
panels are
Immediately after installation, the sides become hot, after the fridge reaches its internal
hot.
temperature, the temperature of the side panels will decrease.
The display
- The temperature in the appliance is
shows 'HT'.
too high.
Abnormal
- The appliance is not stable/level.
noise
- The appliance is making contact with
the wall or other objects.
- 'Super mode' is enabled.
The
- 'Super mode' is enabled.
temperature
- 'Eco mode' is enabled.
cannot be
- The control panel is locked.
set.
The
- The temperature of the appliance is
appliance
set too high.
freezes too
much.
- 'Super mode' is enabled.
The lamp is
- The lamp is broken.
broken.
SOLUTIONS
- Wait a few hours and then check the
temperature again.
- Please refer to Section 4.
- Allow food to cool to room temperature
before storing.
- See the next section.
- Make sure the door is completely closed
and stays closed. Press the 'Alarm/Eco'
button.
- Reduce the ambient temperature by
opening windows or doors or use sun
blinds. Allow food to cool to room
temperature before placing it in the
appliance. Go to Section 6 of Chapter 4
for more information.
- Lower the ambient temperature by opening
windows or doors or use sun blinds. Allow
food to cool to room temperature before
placing it in the appliance. Do not place
too much food in the appliance at the same
time. A maximum of 17 kg can be frozen in
24 hours. Go to Section 6 of Chapter 4 for
more information.
- Readjust the appliance's adjusting legs.
- Move the appliance slightly.
- This is normal. 'Super mode' uses the
maximum power of the appliance. This
means the temperature is temporarily set
to -25°C. After 50 hours, 'Super-mode' is
automatically disabled.
- Go to Chapter 4 'Use' to switch off the
function and set the temperature. Check
the symbol on the display to turn off the
corresponding function.
- Go to Chapter 4 for information on
setting the temperature. The recommended
temperature setting for this appliance is
-18°C.
- Go to Section 3 of Chapter 4 to switch off
'Super mode'.
- Contact customer service.
43

Publicité

loading

Produits Connexes pour WISBERG WBVR186NFE

Ce manuel est également adapté pour:

Wbvr186nfd