Publicité
Les langues disponibles
Les langues disponibles
3. Enable 'Supermode'
When the 'Supermode' function is enabled, the temperature in the box will be cooled
quickly, which helps prevent any loss of the food's nutritional value and preserve its freshness. Press the 'Super'
button (2) to select 'Supermode'.
After the 'Supermode' indicator has blinked for five seconds, 'Supermode' is enabled.
When 'Supermode' is selected, the 'Supermode' indicator will illuminate and display -25 °C. When 'Supermode' is
enabled, the temperature of the appliance cannot be changed. In this case, the 'Supermode' indicator flashes three
times. If the temperature needs to be changed, first switch off 'Supermode'. To switch off 'Supermode':
•
Press the 'Super' button to switch off 'Supermode'.
•
Once 'Supermode' is switched on, and the appliance is not reset, 'Supermode' will automatically switch off
after 50 hours. The appliance returns to the last set temperature setting.
*In 'Supermode' the appliance will consume more energy than normal. The most energy-efficient mode for this
appliance is -18 °C. In 'Supermode' the appliance may emit slightly more noise.
4. ECO mode
Press the 'Alarm / Eco' button for three seconds to select 'Eco-mode'. After the 'Eco' indicator on the display has
blinked for five seconds, 'Eco-mode' is enabled. When 'Eco-mode' is selected, the 'Eco' indicator illuminates on the
display. The appliance is now set to the most efficient temperature setting, based on the ambient temperature. The
appliance will be set automatically according to the following situations.
Ambient temperature (T
Set temperature
When 'Eco-mode' is enabled, the temperature of the appliance cannot be changed.
If the temperature needs to be changed, first switch off 'Eco-mode' by pressing and holding the 'Eco' button for three
seconds.
5. Door alarm
If the door remains open for more than 90 seconds, the door alarm goes off. You can disable it by closing the door
properly or by pressing the 'Alarm / Eco' button.
6. Temperature alarm
If the temperature in the appliance becomes too high, the temperature alarm will go off. The display shows 'HT'
(High Temperature), alternating with the current temperature in the appliance.
Briefly press the 'Alarm / Eco' button to turn off the temperature alarm. If the temperature in the appliance has
dropped to the set temperature, the alarm will be disabled and 'HT' will automatically disappear from the display.
7. Unlock/Lock
Press the 'Lock' button for three seconds to lock the control panel. The display shows the lock and unlock symbol.
When the lock is enabled, the appliance settings cannot be changed. In this case, the 'Lock' indicator blinks three
times on the display. If the appliance needs to be configured, first disable the lock by pressing and holding the
'Lock' button for three seconds.
When the control is unlocked, all buttons are available. If no action is taken within 25 seconds
the control panel automatically locks.
Between 10ºC and 27ºC
a )
-18ºC
Between 28º and 34ºC
-16ºC
39
Above 35ºC
-15ºC
Publicité
