Publicité
Les langues disponibles
Les langues disponibles
Instructions pertaining to a risk of fire or electric shock
When using the HCS, basic electrical safety precautions should be followed:
•
Use this EVSE to charge electric vehicles equipped with an SAE J1772 or NACS charge port only. Consult the
vehicle's owner manual to determine if the vehicle is equipped with the correct charge port.
•
Make certain the EVSE charge cable is positioned such that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
•
This product contains no user-serviceable parts. Consult the "Enphase Support" section in this manual for
service information. Do not attempt to repair or service the EVSE yourself.
•
Do not operate your EVSE if it or the charge cable and connector assembly is physically open, cracked, frayed,
or otherwise visibly damaged. Contact a Service Representative for service immediately. Consult the "Enphase
Support" section in this manual for information on the Service Representative in your area.
•
Not for use in commercial garages where a COMMERCIAL GARAGE is defined as a facility (or portion thereof)
used for the repair of internal combustion vehicles in which the area may be classified due to flammable vapors
being present (such as from gasoline).
•
Do not place fingers inside the coupler end of the charge cable connector plug.
•
Do not allow children to operate this device. Adult supervision is mandatory when children are in proximity to an
EVSE that is in use.
6
© 2024 Enphase Energy Inc. All rights reserved.
HCS installation and operation manual
June 2024
140-00277-04
Publicité
