bath, a device to differential current, not greater than
30mA. Contact your technician for more information.
Do not keep appliance switched on continously for more
than 2 minutes. Bring knob on "0" (OFF) position before
inserting the plug in the socket.
Do not grab the product near to the air outlet, use the
handle. Keep at least at 5cm from the head
WARNING: before use make sure that the voltage
selector is set on the proper voltage
PARTS PH04
1. Airflow concentrator
4. Cord protection
FUNCTIONING
- Set the power switch (6) to "0" and plug the dryer into the power outlet.
- This dryer operates with 2 speeds, set the button (6) to "1" for lower speed and "2" for higher speed.
- Caution: air concentrator (1) heats up quickly. When the dryer is running, do not touch it.
- At the end of drying process, set the power switch (6) to "0" position.
- Let the hairdryer cool down completely. (Approximately 20 minutes)
-
Once the unit is completely cold, store it out of the reach of children.
CLEANING -
Unplug the device from the electrical outlet and wait for the complete cooling down
of the unit before starting cleaning operations.
Do not immerse the dryer in water, but clean with a slightly damp soft cloth. Periodically clean the air intake
inlet (3) with a dry brush in order to avoid the formation of dust, to ensure a good ventilation of the motor.
TECHNICAL FEATURES
•
Power supply: AC 220-240V~50-60Hz - Power: 1000W
•
2 speed/temperatures
ESPAÑOL
A continuación se presentan importantes indicaciones
sobre la instalación, el uso y el mantenimiento. Conservar
con cuidado este manual para cualquier consulta
posterior; utilizar el producto solo de la manera que
indica este manual de instrucciones; cualquier otro uso se
considera inadecuado y peligroso; por ello el fabricante
no puede ser considerado responsable en caso de que se
produzcan daños derivados de usos inadecuados, erróneos
2. Main body
5. Handle
:
ADVERTENCIAS DE USO
3. Inlet air opening
6. 2 speeds power switch
11