Publicité
Les langues disponibles
Les langues disponibles
Instruction for Use/Installation
1
Open the box and remove the product accessories.
2
With one hand, hold the backrest at point A and pull it backwards.
With the other hand, hold the seat board at point B and pull it
forwards. Then, press down on the seat board to align the rear
positioning column with the rear wheel tube.
06
3
Fasten the parking latch on both sides. Note: Make sure the parking
latch is securely fastened and not loose or misaligned.
4
Place the 4" swivel casters on the spring washer, press down and
lock the screws onto the front wheel tube of the wheelchair. Note:
When the installation is complete, the spring washer should be
compressed and flat.
07
Publicité
