Publicité
Function Description
● When connected to the main power supply, the button
turns blue.
● Shortly press the button to open and close the mirror.
On/off button
● Long time touch to adjust brightness (dimming).
When the color reaches the desired color, retract your
fingers for finishing the setting.
Anti-fog Function
● After pressing the defog button, the mirror starts to heat
up and defog. Press again to exit.
● Note: The mist eliminator will automatically stop after
continuous operation for 60 minutes to prevent prolonged
damage caused by high temperature over time.
Defog button
● Press and hold the defog button for about 3 seconds,
and the number of minutes will start flashing. Release
your fingers, and briefly press the defog and on buttons
12:00
to adjust the minutes to increase/decrease.
● Hold the defog button again for about 3 seconds, and
Time display
the clock will start flashing, and briefly press the defog
and on buttons to adjust the clock to increase/decrease.
● After adjusting to the accurate time, complete the
operation and the time display will automatically stop
after flashing about 3 seconds.
Installation Steps
1
Measure the distance
between the hanging
holes of the lamp.
04
2
Mark the position of
the hole on the wall.
3
Drill holes and
install plastic
anchor bolts.
4
Arrange the screws
on the wall and
ensure stability.
05
Publicité
