Publicité
3. Anti-fog function
Power on, press
, the mirror can be defogging, Then press
again to stop defogging.
4. Time setting
Power on, keep pressing
or 12-hour system, keep pressing
again to set minute, press
Product accessories
Wall plug
Mirror
1
B
2
CHOOSE
YOUR
DESIRED
HEIGHT
04
to set time, press
to choose 24-hour
to set hour, keep pressing
to increase the number.
Screw
Balance spacer
Measure the distance between the
two hooks of the mirror.
According to the distance from
A, choose a suitable height and
punch holes in the wall.
3
4
According to the needs, paste
spacers on the back of the mirror
(to keep the mirror balanced), and
Mirror
then hang the mirror.
Electrical Safety Instructions:
Please make sure to keep the electrical supply off during
installation and maintenance.
DO NOT put hard and sharp materials directly against the
mirror surface during operation.
Please to turn off the power supply in storm days.
DO NOT switch off the power supply directly during normal
operation.
Please turn off the power supply if the product is not used for a
long time.
DO NOT remove protective film or corner protectors until the
mirror is completely installed.
DO NOT use outdoors.
PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.
Drive the expansion plug into the
hole on wall. then put screw into
the expansion plug, keep 15mm
screw away from wall to hang
mirror.
05
Publicité
