TREVIDEA Girmi Ecofrit 6.5 Mode D'emploi page 13

FG85
1 Air inlet
5 Tray
COOKING
Carefully wash all accessories and the inner housing first. Allow to ventilate the internal compartment
keeping the container (6) away for about 30 minutes. Before starting with the first cooking, turn on the
appliance for 10 minutes at the maximum temperature.
- Connect to a suitable and earthed power socket.
- Extract container (6) with care and check that the tray (5) is properly mounted on the base of container.
- Insert food in the container (6) and replace the container into the housing (3).
- If appliance went in standby, press
- Set program, temperature, time of cooking, as explained in following paragraphs. Press
Caution: Never use container (6) without tray (5). Do not touch container or inner parts of appliance
during cooking and until complete cooling. Touch only the handle (8).
- Some foods should be mixed and shaked at half cooking. Take the handle (8) and extract container (6).
Shake it, then replace in its position.
- When you ear the timer sound (5 beeps), cooking time is finished. Extract container and check if food is
ready. If not ready, replace container in its position and set additional cooking of some more minutes.
Note: appliance can be switched off manually, pressing for 3 seconds
- To remove food, take out container pour food in a dish.
Be careful to the hot steam when you remove container after cooking.
Don't turn the container (6) upside down, because oil and cooking residues on the bottom of container
could drip on the foods.
- Once cooking finished, if you want to start another one, air fryer is immediately ready.
CONTROL PANEL
A. Icons for 12 preset programs
E. Temperature Increase button
H. Time Decrease button
FUNCTIONING
MANUAL FUNCTION
- If appliance went in standby, press
- Set temperature with the buttons (E and F). Set time with the buttons (G and H). Press
PRESET PROGRAMS FUNCTION
Program
Fries
Chicken thighs
Vegetables
Fish
- If appliance went in standby, press
- On the display appears temperature 185 degree and time 15 minutes.
- Pressing button Menù (I), you can choose between 12 preset programs.
- Once the program is chosen, press
o Set temperature with the buttons (E and F). Set time with the buttons (G and H).
o Press
to start cooking.
Note. Time and temperature set on each program are studied to have correct cookings for the relative
2 Control panel
6 Container
on the control panel (2).
C. ON/OFF Button
F. Temperature Decrease button
I. Button MENU'
on control panel (2).
Time Temperature
25 200
25 200
12 180
20 180
on the control panel (2).
to start cooking, or:
3 Housing
7 Air outlet (on the back)
on the control panel (2).
D. Display
G. Time Increase button
Program
22
Cakes
17
Meat
10
Shellfish
15
Pizza
4 Window
8 Handle
to start cooking.
to start cooking.
Time Temperature
160
180
160
180
12