Publicité
Section 2 - Installation
4
/
Place the camera into the mount, ensuring that the power port
in the back is exposed. Plug the USB power cable into the camera
ensuring it is plugged in all the way.
5
Align the markings on the camera mount and baseplate. Press the
/
camera mount onto the baseplate.
6
/
Twist the camera mount slightly to the right to lock it onto the
baseplate. Adjust the camera angle, then tighten the screw on the
left to lock it in place.
D-Link DCS-8000LHV2 User Manual
All manuals and user guides at all-guides.com
12
Publicité
