2.5 Disassembling and Disposal of the
Appliance
(see the "Environmental Tips" section for best practices on
disposing of this appliance).
The device must only be disassembled by trained
specialists who are familiar with and comply with the
standard national regulations and supplementary
regulations of the local utility companies.
Work on electrical components must only be conducted by
trained electrical personnel.
3. DESCRIPTION OF THE FUNCTIONS
Depending on the model of the rangehood, the following
options are available:
3.1 Air extraction mode
The air is drawn in and cleaned by the grease filter and
directed outside.
3.2 Recirculation mode
The air is drawn in and cleaned first by the grease filter
and then by a charcoal filter. The cleaned air is then
recirculated back into the kitchen.
When using recirculation mode, ensure a sufficient
supply of fresh air, e.g. by opening a window.
3.3 Guide to the appliance
3
2.6 Accessories and Spare parts
Incorrect components can lead to personal injury or
damage to the appliance. Only use original Linärie spare
parts for repairs.
Modifications, additions or alterations to the appliance
can lead to safety risks. If spare parts or accessories from
other manufacturers are used, the warranty will be
invalidated, and Linärie cannot accept liability.
Please check www.linarie.com.au for more information.
Non-return flap
The non-return flap is designed to prevent the exchange of
room and outside air taking place. The flap is closed
when the rangehood is switched off. When the rangehood
is switched on, the non-return flap opens for the cooking
vapors to be blown directly outside. If the on-site
ventilation system does not have a non-return flap, the
nonreturn flap supplied must be fitted.
En
sure a normal and comfortable room climate (humidity
of 45–60%), e.g. by opening natural ventilation openings
or using domestic ventilation systems.
After every use in recirculation mode, switch the
rangehood to a low level for about 15 minutes.
1
2
5
1. Inside chimney bracket
2. Inside chimney
3. Outside chimney
4. Hoods
5. Control panel
4
5