Setting up and filling the
paddling pool
Setup should always be carried out by
an adult.
1. Select a suitable area that is clean and level
and has enough room to unpack and unfold the
paddling pool. Spread out the product where it
is to go. Make sure that it is in perfect condition.
2. Fill the product slowly and do not leave the
product unattended while filling.
Emptying and folding up the
product
1. Open the drainage outlet and let the water
run out.
Note: Please take note of the local pro-
visions for specific regulations on dis-
posing of water from swimming pools.
2. Let the product dry completely before folding
it up.
Repairs
WARNING!
You should never attempt to repair larg-
er damaged areas yourself.
Minor damage can be repaired using the repair
kit supplied. Empty all of the water before com-
mencing any repair work.
1. Clean the damaged area with an alcohol-based
solution. Roughen the area surrounding the tear
or hole slightly using fine sandpaper.
2. Now cut a patch that is large enough to cover
the damaged area plus 1.25cm around it on
all sides.
3. Apply the glue to the appropriate spot on the
paddling pool as well to on the patch itself.
Leave the glue to dry for approx. three minutes.
4. Press the patch down with a soft object. Make
sure to work on an even surface without any
creases or folds. Using a rounded object,
gently remove any bubbles, moving outwards
from the centre.
5. Wait for at least 12 hours after the repair
before re-filling the paddling pool.
Storage, cleaning
Change the water in the product frequently –
especially in hot weather and when it is dirty!
When not in use, always store the product clean
and dry at room temperature. Only fold up the
product and place it in the storage pouch when
it is completely dry. The drainage outlet should
always be kept closed during storage. Only clean
the product with water or mild soapy water –
never with harsh cleaning agents. When storing
for the winter, do not place any sharp objects on
the product or apply talcum powder to it.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling. The code
consists of the recycling symbol – which
is meant to reflect the recycling cycle – and a
number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under continuous quality control. DELTA-SPORT
HANDELSKONTOR GmbH gives private end
customers a three-year guarantee on this product
from the date of purchase (guarantee period)
in accordance with the following provisions.
The guarantee is only valid for material and
manufacturing defects. The guarantee does not
cover parts subject to normal wear and tear that
are thus considered wear parts (e.g. batteries)
or fragile parts such as switches, rechargeable
batteries, or parts made of glass.
GB
13