Publicité
Les langues disponibles
Les langues disponibles
6
Adjusting the Saddle/Seat
If the height of the saddle/seat is not suitable for your child, please release the
quick release lever of the saddle post and adjust the height and direction of the
saddle. Please note the "minimum insertion mark" on the tube. Tighten the quick
release lever to fix the saddle post to the right position.
Adjustment nut
1
Quick-release
lever
Minimum
insertion mark
Saddle chuck
Identification of minimum seatpost insertion length
Mounting saddle
Insert the saddle tube into the seat tube chuck on the frame and adjust the
insertion depth to suit the rider's height (note: the insertion depth should be such
that the safety markings are not visible). Adjust the direction of the saddle and
tighten the nut. (Tighten the nut, the torque is not less than 25N.m)
Note: The locking torque of saddle clamp is more than 18N.m.
10
Seat post
2
Minimum
3
insertion mark
1. Move the quick release handle to the OPEN position (the sign faces the
operator).
2. Turn the adjusting nut clockwise until the adjusting nut contacts the
quick-release chuck, and then reverse it for one or half turn, and then push the
quick-release handle to the CLOSE position. Pull-out force above 10kg (22LBS)
3. Push the head and side of the saddle firmly. If the saddle moves left and right
or up and down, check whether the saddle chuck locks the saddle tube, and then
check whether the quick-release device is tightened. Repeat steps 1 and 2 if
necessary.
7
Fixing the handlebar
Remove the protective cover from the end of the stem. Place the end of the stem
in the mounting. Adjust the handlebar to the right height and direction,
perpendicular to the front wheel. (Please note the "minimum insertion mark" on
the tube.) Tighten the bolt on the top of the tube. When the handlebar is correctly
fixed, the child should be able to easily reach the tow grips of the handlebar with
his/her hands.
stem
Minimum insertion
mark
Protector to be
removed
Saddle quick
release system
Stem post
Minimum insertion
mark
Steerer tube
Headset
11
Publicité
