Operational Precautions - Oceanic OL12-BD001E Guide D'utilisation

2.2 OPERATIONAL PRECAUTIONS

WARNING- to reduce risk of fire, electric shock or injury to persons or property:
 Always operate the unit from a power source of equal voltage, frequency and rating
as indicated on the product identification plate.
 Do not leave the unit running unattended.
 Do not touch the aluminum fins of the unit.
 Do not operate the unit if it is dropped, damaged or showing signs of product
malfunction.
 Do not operate the product with damaged plug or cord. If it is not working properly,
contact a qualified electrician or service centre for examination and repair, never try
to dismantle it by yourself
 The unit shall be installed in accordance with national wiring regulations.
 Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
 The appliance shall be stored in a room without continuously operation sources (for
example: open flames, an operating gas appliance or an operating electric heater).
 The appliance shall be stored properly, so as to prevent mechanical damage from
occurring.
 Do not piece or burn the unit, even after use.
 Be aware that refrigerants may not contain an odour.
 The unit shall be protected from physical damage and shall not be installed in an
unventilated space, if that space is smaller than 4 m².
 Compliance with national gas regulations shall be observed.
 Keep any required ventilation openings clear of obstruction.
 The appliance shall be stored in a well-ventilated area where the room size
corresponds to the room area as specified for operation.
If you don't understand something or need help, please contact the professional
services
4