Audio Setting; Selecting Preset Fm Stations - Peaq PDR350BT-B Mode D'emploi

AUDIO SETTING

Selecting Mono or Stereo mode.
1. Press PRESET
setting" and
ENTER. Following options are available:
2. Press PRESET
confirm by pressing ENTER.
Alternative the audio setting can be set
with by pressing MONO/ST. on the remote
control.
STORE FM STATIONS
You can store up to 10 preset FM stations.
1. Select the desired FM station.
2. Press and hold MEMORY until "Save to
Preset" appears on the display.
3. Select a preset number from 1 – 10 and
confirm by pressing ENTER.
4. The preset number of the stored station
is displayed.
5. Repeat steps 1 to 4 to store more FM
stations.

SELECTING PRESET FM STATIONS

1. Press MEMORY to access the preset
menu.
2. Press PRESET
number and confirm by pressing ENTER.
IM_PDR350BT_1_150930_V04_HR.indb 61
to select "Audio
confirm by pressing
to select and
to select a preset
AUDIO IN
1. Connect the audio cable (not included)
into the AUDIO IN jack (3.5 mm) at the
rear side of the device.
2. Press MODE to select AUX IN as a
source.
3. Start playing from the device.
Attention:
Check the safety and user instruction of the
external device before connection.
CD-Mode
Press MODE to select CD as a source.
ENGLISH
CD
61
30/9/15 4:38 PM