Publicité
Les langues disponibles
Les langues disponibles
Mobil TV Instructions
Switching the TV On Using 12 Volt
1.
Connect the cigarette lighter plug cable into the cigarette lighter socket of your car.
2.
Plug the other side of 12 volt cable into DC 12 socket on the back side of the TV. Then the standby LED
will light up.
3.
Press the Standby button, Programme +/- buttons or a numeric button on the remote control or press the
middle of the control switch on the TV in. The TV will then switch on.
4.
Adjust the antenna position for better reception or reinstall TV channels if necessary.
Switching the TV Off
1.
Press the Standby button on the remote control or press the middle of the control switch on the TV in and
hold it down for a few seconds, so the TV will switch into standby mode.
2.
Unplug cable connectors and power plugs.
ATTENTION: 12 V Input :
V+
V+
V-
V-
English - 55 -
Publicité
