Publicité
Les langues disponibles
Les langues disponibles
Funnel Assembly
1. Fit the funnel onto the motor housing, aligning the
funnel gap with the motor bracket rib. Lock the clamps
located on the motor bracket to secure the funnel in place
(Fig. 5).
Fig. 5
2. Fit the funnel cover in the funnel. Use the 8 locking tabs
on the funnel to ensure a secure fit (Fig. 6).
Fig. 6
Clamp
Funnel
Gap lines up with rib
Motor housing rib guide
Funnel cover
Locking tabs
Funnel
Fitting the Collection Bag
NOTE: This unit does not come with a leaf collection bag; you
must supply your own. You may use a plastic, paper, or cloth
collection bag, depending on your preferred method of waste
disposal.
1. Open the bag and fit it around the motor housing (Fig. 7).
Fig. 7
2. Use the elastic strap located at the base of the motor
bracket to secure the bag in place (Fig. 8).
Fig. 8
Elastic strap
7
Leaf collection bag
Leaf collection
bag
Publicité
