Publicité
6
CRIB ASSEMBLY - MATTRESS SUPPORT PANEL ASSEMBLY
6a. Align the Mattress Support Panel (11) to all the
corners of the crib as shown in the illustration.
6b. Position the Wooden Dowel (E) between the
mattress support panel and stabilizer bar.
6c. Use the Bolts (D) to attach the Mattress
Support Panel to the corners of the crib.
6d. Note that the Lowest position of the
Mattress Support Panel will be
for Toddlers (babies who can
stand up and walk), the Mid
position is for infants (babies
who start to turn and sit up)
and the Highest Position is for
newborn babies.
6e. Ensure that the Mattress
Support Panel is flat side up
and not at a slant.
NOTE:
• The Warnings printed on the
pouch attached to the
mattress support panel must
face up, and the springs must
face up.
• This crib has adjustment
positions. Use the highest only
for newborns, and move the
mattress down as the child
grows.
WARNING:
• Fall Hazard: When a child can
stand, set the mattress at the
lowest position and remove
bumper pads, large toys, and
other items that could serve as
steps for climbing out.
D
Bolt M6 X 15 MM (x4)
Boulon M6 X 15 MM (x4)
Perno M6 X 15 MM (x4)
22
(D)
E
Wooden Dowel (x1)
Cheville en bois (x1)
Clavija de madera (x1)
11
(D)
www.dreamonme.com/help
(D)
(D)
11
Publicité
