Evolite HAZER PRO 2000 Mode D'emploi page 11

 Maintenance & service
o Cleaning
 Clean with soft cloth using normal glass cleaning fluid.
 Always dry the parts carefully.
o Troubleshooting
Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting:

The fixture does not work
o
Check the connection of power and main fuse.

Not responding to DMX controller
o
Check DMX connectors, cables to see if link properly.
o
Check the address settings and DMX polarity.
o
If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the fixture or the previous
one.
o
Try to use another DMX controller.
o
Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to
DMX interface circuit.
o
Check the fluid level in the tank

Technical Specifications
Model
Fluid
Voltage
Power consumption:
Packaging size / G.W.
HAZER PRO 2000 Manual Ver. 1.00[Texte]
HAZER PRO 2000
Hazer Fluid
230v 50Hz
2000W
550x320x460mm
/ 20 kg
Page 11