Publicité
Les langues disponibles
Les langues disponibles
3.3
Pure Air Pro
How to fold your e-scooter back
together.
WARNING!
Battery and charger
The motor of your e-scooter is powered using a lithium-ion
battery.
Fully charge the battery using the charger provided before
using it for the first time. Always charge the battery in a dry
and clean environment, and turn off the e-scooter during
charging. Only use the provided battery charger with your Pure
Air Pro, and if you notice any damage on the charger or cables,
do not use it and contact Pure Electric. Only charge the Pure Air
Pro in temperatures between 0°C and 40°C.
Plug one end of the charger into a wall socket and the other
into your Pure Air Pro. You will see a red light on the charger
which indicates that the battery is charging, but is not yet fully
charged. During the battery's first charge cycle, this can take up
to eight and a half hours
Unfold the kickstand (15) and stand
1
beside the e-scooter.
Hold the handlebar (1) firmly with
2
one hand and release the safety
mechanism before opening the clamp
(9) with the other hand
Slowly fold down the stem (7). Adjust the
3
clamp and fix it to the hook (13) on the
rear fender.
.
18
Publicité
