Publicité
Les langues disponibles
Les langues disponibles
Engraving Angle Adjustments
1
Turn the Angle Adjustment Knob counter-
clockwise to adjust the engraving angle of the
Rotary Headstock.
2
Tighten the Knob clockwise using the Hex Key
H3 and lock in the desired angle of the Rotary
Headstock.
10
3
Loosen the knob at the top of the Tailstock to
adjust the height of the a ached material so
that it is level. Tighten the knob to secure the
position of the Tailstock.
Rotate the knob
Publicité
