VWR Avantor W10 Instructions Pour L'utilisation page 4

Description of Buttons and Switches
Instruction manual (GB)
Getting Started
Turn the unit ON by pressing the upper part of the power switch; the power switch shows
green light and the display shows actual temperature.
To change the desired temperature, see instructions 1-2-3 in the figure above.
If you press longer than 3 seconds and the display shows P5 then reset the unit by pressing
the power switch OFF and then ON. Start at 1 again, see above.
Important Guidelines
Please observe that the heated area can be hot.
Clean the unit with a soft cloth and use mild detergent or diluted (50%) alcohol.
Service and repair should only be made by an authorized technician.
4 (28) vwr.com Instruction manual VWR ® Hotplate W10