VWR Avantor W10 Instructions Pour L'utilisation page 3

Package Contents
Description
Hotplate W10
Power cord
Instruction manual
Installation
Unpack the delivery. Check that the unit is not damaged and that all parts are included.
Place the unit on the work area. Connect the unit to an electrical grounded mains power socket, use the units
power cord (which has a ground connection).
Check that the unit is OFF; no lights on the power switch or display. (If the unit is ON, green light on the power
switch and red light on the display, then press the down side of the power switch, the lights goes OFF.)
Intended use and overview
The product is for use at a general laboratory.
casing is made of white powder coated aluminium. The heated surface is coated with black thermoplastic.
The unit is equipped with a power switch with green light, a temperature control unit with digital display, internal
heating element and an overheat protection fuse.
Product Specifications
Mains power:
Power consumption:
Temperature range:
Thermostat:
Temp. accuracy:
External dimensions:
Weight:
3 (28) vwr.com Instruction manual VWR
Quantity
1
1
1
It must only be used by suitably trained personnel. The units
230 VAC 50/60Hz
260 W
+20 to +90°C
Digital
±1°C
W:146 x D:486 mm x H:70 mm
3,1 kg
® Hotplate W10
Instruction manual (GB)