Qilive Q.1638 Mode D'emploi page 88

Getting started Getting started
Notifications & Characteristics & Accessories
Information relating to the environment
This television is designed to consume less power in
a bid to protect the environment. In order to effectively
reduce your electric energy consumption, you have
to follow the steps below:
If you set the energy economy mode to Eco, TV will
enter energy economy mode. The energy economy
mode can be found at the level of the 'Image' submenu
under the main menu. Note that some image settings
cannot be changed.
If the option "disabled Image" is selected, the
message "the screen will turn off in 15 seconds"
will appear on the screen. Select the CONTINUE
option and press OK to continue. The screen will turn
off automatically.
Turn the television of and disconnect it when not
in use. This good practice will also help you to
economise energy.
Standby notifications
1. If the television does not receive any incoming
signal (an antenna or an HDMI source for
example) for 5 minutes, it will go on standby. The
next time it is turned on, the following message
will appear : "Standby mode if no signal" Press
OK to continue.
2. If the television stays inactive for 4 hours, it will
enter standby mode. The next time it is turned
on, the following message will appear: "Standby
mode if no signal" Press OK to continue.
Functions
• Colour television with remote control.
• Digital tuner cable and High definition TNT (DVB-
T/C)
• The HDMI ports are meant for devices with HDMI
plugs.
• USB ports.(with digital video tape-recorder function)
• OSD Settings Menu.
• Jack socket for external devices (video camera,
video game, audio player, etc.)
• Stereo sound system.
• Teletext.
• Headphone jack.
• Automatic settings system.
• Manual setting.
• Automatic shutdown which can be set between 2 to
6 hours maximum without using the remote control.
• Programmable shutdown.
• Parental control lock
• Automatic sound-off when there's no transmission.
• NTSC Video .
• AVL (Automatic Volume Limitation)
• PLL Tuner (Frequency scanning).
• PC port with Plug & Play function.
• Instant Plug&Play for Windows 98,) ME, 2000, XP,
Vista.
• Gaming mode (optional)
Accessories included
• Remote control
• User manual
• Batteries not included
Television's command buttons
The control button & the Functioning of the TV
1. Previous
2. Next
3. Program / Volume / AV / Standby command
selection
The button makes it possible to control the ''Volume''
/ ''Program'' / ''Source'' functions and to Enable
Standby Mode on your television.
To adjust the volume: Increase the volume by
pressing the Up button. Reduce the volume by
pressing the Down button.
To change channels: Press the centre of the button
for information on the channel to appear on the
screen. Browse through stored channels by pressing
the Up or Down button.
English - 87 -