IDEAL 61-847 Mode D'emploi page 21

Operation
Short press toggles sequentially through the 4 selections
When HI or LO appear, press the up or down arrow keys to increase or decrease the alarm
levels. When the emissivity icon appears, press the up or down arrows to increase or decrease
that value. NOTE: 0.95 is a good general purpose setting for most materials. When F or C
appear, press either arrow key to switch to the other scale. When the speaker icon appears, press
either arrow to select sound to be on or off. A beep will sound when you select sound to be on.
When the lock icon appears, using the arrow buttons select the minutes and seconds before the
unit auto powers off. Use the 'Backlight/Laser' button to toggle between minutes and seconds.
Press to select HI or LO alarm indication. OK appears if temp is within alarm limits.
Short press toggles the Backlight On or Off. Long press toggles the laser pointers On or Off.
Short Press for small increments or hold for long increments of selected value.
21