Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
6
K
Attach one end of high pressure hose (N) into the
connector of spray gun (K) by pressing the end into
place. It will make a "click" sound when firmly in place.
The hose is now securely attached to spray gun.
8
1
Unlocked
Locking Spray Gun (before Lance installation) To lock
trigger of spray gun (K), point gun away from you and
turn dial to lock ("3" and "9" position). Squeeze or pull
trigger to make sure it is locked. Always leave in locked
position when not in use. This ensures the gun is in
"safe" mode until it is ready for use. Turn dial to unlock
("12" and "6" position) to release spray gun trigger.
Note: The trigger lock prevents trigger from being
accidentally engaged.
N
K
Locked
7
K
1
N
To remove the high pressure hose (N), pull back on
collar of spray gun (K) and pull out the hose.
9
I
1
Extension Lance Installation
While spray gun (K) is in the locked position, insert
lance (I) into the end of spray gun by inserting and turn-
ing clockwise until fully in place. To remove, turn coun-
terclockwise.
N
2
K
9
Publicité
