EN
ASSEMBLING AND WATERING
1 -
Assemble castors: put the appliance on a flat surface, take out the wrench from foam box,
then assemble the castors. (map 1)
2 -
Watering: add water into the water tank.(map 2)
Attention:
a -
Pay attention to the level of water tank when add water.(map 3)
b -
The level of water tank should not over "MAX" scale at any time, when humidifying,
the total level of water tank should not below "MIN" scale.
c -
Put ice or frozen air crystal box into the water tank if you want to strengthen the
efficiency of cooling. But the total level of water tank should not over "MAX" scale.
12
map 1
map 2
map 3