Redfox BR 70/80 E Notice D'installation Et D'emploi page 7

INSTRUCTION FOR USE
Attention!
Before the fi rst use of the appliance you must remove protection foil, wash the device and bath with
water containing washing liquid and then dry with the cleaning cloth. Into the bottom of the bath spread
a vegetable oil and begin burning procedure by 230°of Celsius. Before you start cooking, it is necessary
make this burning procedure. The optimum is about 3–5 days use appliance as frying pan, and then for
cooking. If pans washing was done by chemical substances, we recommend to use about 4-6 cycles as
frying pan before you start cooking in it again. The device cannot be used under any circumstances as
a fryer or its substitute
Attention!
Never leave device unattended while in use. Always use device under supervision. Tilting pan can be
used for meat frying, sauce cooking, potato cooking, soup making etc. Never switch device on, if is pan
empty.
Switching on and off
Turn the control knob to right and set required temperature between 50 - 300 ° degrees of Celsius. When
device switched on, orange control light is lighting, green control light is indicating working heaters. If
green light goes off, temperature is set. To switch the device off, set control knob back to position 0.
Filling water to the bath
Open valve for water fi lling and when achieve required volume of the water, simply close it. Water fi lls up
only when the lid of the bath is open.
Draining of the bath
Tilt the bath to required position for her drain with help of the manipulation handle. Attention! Before you
start draining of the bath, attach under overfl ow suitable container. Keep maximum attention if you will
be manipulating with boiling content. After successful bath draining, return it back to operation position
! BEFERO FIRST USE THE MACHINE IS NECESSARY
READ THIS USER MANUL !
7