Publicité
1
Install TV Brackets
1-1
For TV's with a flat/unobstructed back
M4/M6/M8
[01], [02]
[05]
[04]
Before you begin, hand thread screws into the threaded
inserts on the back of your TV to determine the correct
screw diameter (M4, M6, or M8). Verify that there are
adequate threads to secure the brackets to the monitor.
If you encounter resistance, stop immediately and
contact customer service.
CAUTION:
Avoid potential personal injuries and
property damage! Use the shortest screw and spacer
combination to accommodate your needs. Using hardware
that is too long may damage your monitor's internal
components.
Ensure the brackets are level on the back of the TV
and the directional arrow at the bottom of each
bracket is pointing upward.
If you require additional space for cables, recesses, or
protrusions, see the next configuration.
[02]
[01]
5
Publicité
