Zeegma Knapper Pro Manuel De L'utilisateur page 7

4. Handle
5.
Bowl
6. Air outlet
Basket release button
7.
Control panel description (fig. B)
On/off switch
1.
2. Display
Increase temperature button
3.
Decrease temperature button
4.
5. Menu
Time-shortening button
6.
Time extension button
7.
8. - 14. Seven automatic programs for easy meal preparation
Before first use
Remove all cardboard boxes and protective foils from the device.
1.
2. Wash the basket and bowl with warm water and a mild detergent.
Wipe the outside of the device with a damp cloth.
3. Run the device for approx. 10 minutes at 200°C. There may
be an unpleasant smell coming from the device - this is normal
when using it for the first time.
Use
1. Place the product on a stable and level heat-resistant surface.
Hold the handle (4, fig. A) and pull the bowl (5, fig. A) with the
2.
basket (3, fig. A) out of the device body. Note! Do not press the
basket release button (7, Fig. A) during this operation.
Place the prepared products in the basket. When filling the basket,
3.
do not exceed the MAX indicator located inside the basket. Insert
the basket together with the bowl into the body of the device.
Connect the device to a power source. Press the switch (1, fig. B)
4.
to turn the device on. Press this button again to start the warm-up
process. Another press will turn the device off.
Press the increase (3, fig. B) or decrease (4, fig. B) button to set
5.
the desired operating temperature of the device. Pressing these
buttons causes a change of 5 degrees.
Press the shortening (6, fig. B) or extension (7, fig. B) button to set
6.
EN