Indel B SAFE 10 SMART Mode D'emploi page 35

INSTRUCTIONS FOR USE
The Safe appears to the user with its door open and ready for use.
SAFE OPENING AND CLOSURE
To close the Safe the user must keep the door pressed and type on the keypad the code followed
by the # key. This code can be composed by four to nine digits, at user's discretion.
To open the Safe you just need to type the same code, again followed by the # key. While the code
is set, if a wrong digit is typed, press the * key to cancel it and insert the right digit.
It is possible to change the secret code everytime the Safe is opened and closed
WARNING
If the user forgets the code and the Safe is closed, or if the user leaves the room and the Safe is
closed, it is possible to open the Safe using the Owner Key, the Master Key or the mechanical key.
OWNER KEY - MASTER KEY
In case the user forgets the code typed and the Safe is closed, it is possible to open it using the
Owner Key or the Master Key, by proceeding as follows.
Place on the receiver the Owner Key or the Master Key; an acoustic signal ("beep") confirms the
Safe opening.
Keypad
Receiver
Owner Key
Master Key (optional)
Door
33
Receiver